BZMQV - CHOICE FLOOR FINISH, PC5332
- MSDS: BZMQV
- Manufacturer: OLDE TYME PRODUCTS INC
- Product Name: CHOICE FLOOR FINISH, PC5332
- National Stock Number: 7930-00N066634
Product Identification
Product ID:CHOICE FLOOR FINISH, PC5332
MSDS Date:09/28/1992
FSC:7930
NIIN:00N066634
MSDS Number: BZMQV
Responsible Party
CARSON, CA 90746
US
Emergency Phone: 800-535-5053; 214-278-1304
Info Phone: 800-445-8190
Cage: 5N883
Contractor
Telephone: 213-537-4311;800-445-8190
Cage: 5N883
Ingredients
ACRYLIC POLYMER
CAS: 25068-63-7
OSHA PEL N/K
ACGIH TLV: N/K
ALKALI SOLUBLE RESIN
OSHA PEL N/K
ACGIH TLV: N/K
DIPROPYLENE GLYCOL MONOMETHYL ETHER; (GLYCOL ETHER DPM)
CAS: 34590-94-8
RTECS: JM1575000
Fraction By Weight: 4%
OSHA PEL S, 100 PPM
ACGIH TLV: S, 100 PPM/150 STEL
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:CAN CAUSE SKIN AND EYE
IRRITATION ON PROLONGED CONTACT. VAPOR OR MIST CAN IRRITATE NOSE
AND THROAT, CAN CAUSE HEADACHE AND NAUSEA. PRODUCT CONTAINS GLYCOL
ETHER DPM WHICH IS SUBJECT TO THE REPOR TING REQUIREMENTS OF
SECTION 313 OF THEEMERGENCY PLANNING AND COMMUNITY RIGHT-TO-KNOW
ACT OF 1986 AND OF 40 CFR 372.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN & EYE:FLUSH WITH WATER FOR @ LEAST 15 MINUTES. CONTACT
PHYS IF IRRITATION DEVELOPS. INHAL:MOVE TO FRESH AIR. INGEST:DRINK
2 GLASSES OF WATER, CONTACT PHYS.
Fire Fighting
Extinguishing Media:NOT APPLICABLE.
Fire Fighting Procedures:NOT APPLICABLE. USE NIOSH/MSHA APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE 212F. POLYMER
FILM CAN BURN.
Accidental Release
Spill Release Procedures:KEEP SPECTATORS AWAY. FLOOR MAY BE SLIPPERY;
USE CARE TO AVOID FALLING. KEEP SPILL OUT OF SEWERS AND OPEN BODIES
OF WATER. TRANSFER LIQUID TO CONTAINERS FOR RECOVERY OR DISPOSAL.
TRANSFER SOLID DIKING MATL TO CNTNRS FOR DISP. WASH CLTHG BEFORE
REUSE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP OUT OF THE REACH OF CHILDREN.
AVOID TEMPERATURES ABOVE 350F. KEEP FROM FREEZING. PRODUCT MAY
COAGULATE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:1.0 (H*2O=1)
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:COMPLETE
Appearance and Odor:MILKY WHITE LIQUID, MILD ACRYLIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CO, CO*2.
Disposal
Waste Disposal Methods:FOLLOW ALL FEDERAL, STATE AND LOCAL WASTE
DISPOSAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.